Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Peugeot
    3. : Satelis 250

Peugeot Satelis 250 - Video guides

Peugeot Satelis 250
How do you disassemble the engine of the Peugeot Satelis RS 250?
In order to disassemble the engine of the Peugeot Satelis RS 250, it will be necessary to loosen the screws that fix the block to its housing in the center of …Read all…
Posted on 4 April 2025 by ScegliAuto
Peugeot Satelis 250
How to replace the gearbox oil of the Peugeot Satelis 250
In this video tutorial we will see how to replace the transmission oil of the Peugeot Satelis 250 scooter, following the instructions below. First of all, we …Read all…
Posted on 3 March 2025 by ScegliAuto
Peugeot Satelis 250
How to Replace the Exhaust on a Peugeot Satelis 250?
To replace the exhaust on a Peugeot Satelis 250, you need to loosen the screws that secure the exhaust tip to the corresponding mounts. Once the screws are …Read all…
Posted on 16 October 2026 by ScegliAuto
Peugeot Satelis 250
How to Replace the Spark Plug on a Peugeot Satelis 250
To replace the spark plug on a Peugeot Satelis 250, you need to pry off the side panel located on the right side of the footwell. Once this panel is removed, …Read all…
Posted on 1 October 2026 by ScegliAuto
Peugeot Satelis 250
How to Replace the Battery on a Peugeot Satelis 250
To replace the battery on the Peugeot Satelis 250, you need to open the under-seat compartment by loosening the screw located at the front. This will allow …Read all…
Posted on 3 September 2026 by ScegliAuto

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos