Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Peugeot
    3. : Elyseo 100
It will be possible to replace the starter motor of the Peugeot Elyseo 100 by loosening the screws that secure the transmission casing, located next to the rear wheel on the left side of the motorcycle: once the casing has been removed, access to the underlying components will be possible. By removing the clutch, the starter motor that engages directly with the flywheel can be identified: the cables must be disconnected and the fixing screws removed to free the starter motor. At this point, it will be possible to position the new spare part and verify that everything works.

Posted on 23 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the starter motor on the Peugeot Elyseo 50 - 125
How to replace the starter motor on the Peugeot Elyseo 50 - 125
Elyseo 50 In this video tutorial, you will see the steps to remove and replace the starter motor of the Peugeot Elyseo 50 scooter, as well as the 125. First, p…
How to Replace the Spark Plug of the Peugeot Elyseo 50
How to Replace the Spark Plug of the Peugeot Elyseo 50
Elyseo 50 Let's briefly go through the instructions that will allow you to remove and replace the spark plug of the engine of the Peugeot Elyseo 50 scooter. Fi…
How to Change the Engine Oil of the Peugeot Elyseo 125
How to Change the Engine Oil of the Peugeot Elyseo 125
Elyseo 125 Briefly see how to perform the routine maintenance service on the Peugeot Elyseo 125 scooter by changing the engine oil and oil filter. First, place …

How to Change the Engine Oil in a Royal Enfield 500?

In this tutorial, you will learn how to change the engine oil in a Royal Enfield 500, an extremely simple and quick operation to be performed every 12 months. First, ensure that the engine is cold, then place a container underneath and, using a 10mm socket, unscrew the two bolts related to the drain holes. Once the oil has drained from the system, open the filter cap using the same socket, insert the replacement, and reassemble everything in reverse order. Finally, pour in new 15W50 oil through the upper hole.

Watch the video!


by ScegliAuto

More videos