Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Motor on the Peugeot 406 V6

Model: Peugeot 406 MK 1 - Years 1995-2005
Part: Starter motor

In this video tutorial, you will learn how to remove and replace the starter motor on the Peugeot 406 with a V6 engine. To access the starter motor, it will be necessary to lift the vehicle; then remove the panel located under the engine and unscrew the fixing bolts of the starter motor to remove it, disconnecting the power wiring. At this point, replace the starter motor with the new one, using the original replacement part; connect the electrical wiring and secure the starter motor with its bolts, applying the reverse procedure!

Updated on 22 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb of the Peugeot 406
How to replace the front headlight bulb of the Peugeot 406
Peugeot 406 (1995-2005 / MK 1) Replacing the headlight bulb of your Peugeot 406 is undoubtedly one of the simplest maintenance operations, and thanks to the following guide you wil…
Guide to replacing the timing belt of the Peugeot 406
Guide to replacing the timing belt of the Peugeot 406
Peugeot 406 (1995-2005 / MK 1) Today's instructions will show us how to disassemble and replace the timing belt of the Peugeot 406. First, we open the hood of the car and start uns…
How to remove and repair the cabin fan of the Peugeot 406
How to remove and repair the cabin fan of the Peugeot 406
Peugeot 406 (1995-2005 / MK 1) The following steps will guide you through removing, replacing, or repairing the cabin fan motor of the Peugeot 406. First, locate the cabin fan, whi…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos