Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 406
    4. : Starter motor replacement

Peugeot 406 - Video tutorial

Model: Peugeot 406 MK 1 - Years 1995-2005
Part: Starter motor
Operation: Starter motor replacement

Before starting to disassemble the starter motor, it is advisable to disconnect the battery; at this point it is necessary to remove the air filter box to access the motor fixing pins and also the diesel filter to access the power cables (once the filter has been removed, apply latex gloves to the ends of the tubes to contain any spillage of diesel fuel); once the cables have been disconnected and the fixing pins of the motor have been removed, it is possible to remove it from its seat and proceed backwards to install the new one: you can also opt for a regenerated one.


Posted on 18 August 2023 by ScegliAuto



How to replace the starter motor of the Peugeot 406 V6
Peugeot 406 (1995-2005 / MK 1) In this video tutorial we will see how to remove and replace the starter motor of the Peugeot 406, with V6 engine. To access the starter motor it wil
Timing belt replacement
Peugeot 406 (1995-2005 / MK 1) Access the engine compartment and disconnect the negative pole of the battery; then remove the air filter container, the plastic engine cover and the
Air conditioning recirculation
Peugeot 406 (1995-2005 / MK 1) The guide begins by showing how the recirculation of the air conditioning does not work. First you remove the pollen filter to see if the air recircu

Other guides that may interest you

How do you open the fuel flap of the Volkswagen Golf 5?

In order to open the fuel flap of the Volkswagen Golf 5, you need to press the appropriate button inside the passenger compartment, which is located in the rear part of the glove box on the driver's door. By pressing the button, the flap will unlock and it will then be possible to open it manually. Once the flap has been opened, the fuel tank access cap must be unscrewed. To close everything again, it will be sufficient to screw the tank cap again; subsequently, the flap must also be closed, pressing it so that it fits thanks to its locking mechanism.

Watch the video!


by ScegliAuto

More videos