Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Dashboard Light Bulbs

Model: Peugeot 406 MK 1 - Years 1995-2005
Part: Instrument panel light

Replacing the backlighting lights of the climate control display is very simple. Using a small flathead screwdriver, detach the caps located on the sides of the display; this allows access to the screws securing the display, which must be unscrewed. At this point, pull the display from its housing and disconnect the connector to facilitate the bulb replacement (they come complete with a holder); then detach the holders (bayonet fitting) and fit the new ones, ensuring they are correctly secured. Proceed in reverse for reassembly.

Updated on 10 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Number Plate Light and Checking Bulb Holder Contacts
Replacing the Number Plate Light and Checking Bulb Holder Contacts
Peugeot 406 (1995-2005 / MK 1) First, switch on the light switch and check if one or more of the number plate lights are functioning. If you need to replace them, gently pry off th…
How to Reset the Service Light on a Peugeot 406
How to Reset the Service Light on a Peugeot 406
Peugeot 406 (1995-2005 / MK 1) To manually reset the service light that illuminates on the instrument cluster of your Peugeot 406 (1995-2005), it takes just over ten seconds. First…
How to Remove the Instrument Cluster from the Peugeot 406
How to Remove the Instrument Cluster from the Peugeot 406
Peugeot 406 (1995-2005 / MK 1) Today's guide will show you the steps to remove and replace the instrument cluster of the Peugeot 406. First, get inside the vehicle and start unscre…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos