Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Car Gearbox Replacement

Model: Peugeot 406 MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Transmission

Video tutorial

Replacing the gearbox in any car is a straightforward task. By following the simple steps in this guide, you can complete the operation without issues, avoiding the need to consult a specialist mechanic.

To proceed, remove the lower engine component, including the thermal insulation panels, and only then remove the button for the gear lever. It is advisable to position the car on a jack for easy access to the bolts and nuts, allowing you to slide off the gaiter and extract the gear lever from the top.


Updated on 11 February 2026 by ScegliAuto


Related tutorials

Peugeot 406 Gearbox Replacement
Peugeot 406 Gearbox Replacement
Peugeot 406 (1995-2005 / MK 1) Remove the small plastic cover located between the gearbox and the climate control switches, followed by the larger main plastic cover. Using a plast…
Clutch Replacement Instructions
Clutch Replacement Instructions
Peugeot 406 (1995-2005 / MK 1) This maintenance requires a good understanding of general mechanics and specific tools to perform the installation correctly. The clutch is the compo…
Removal and Replacement of the Drive Shaft
Removal and Replacement of the Drive Shaft
Peugeot 406 (1995-2005 / MK 1) This video illustrates how to remove or replace your drive shaft. First, position the car on a jack and raise it; then proceed to remove the wheel. O…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos