Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 406
    4. : Drive shaft removal and replacement

Peugeot 406 - Video tutorial

Model: Peugeot 406 MK 1 - Years 1995-2005
Part: Transmission
Operation: Drive shaft removal and replacement

This video shows us how to remove or replace our driveshaft. First of all, let's start by placing the machine on the jack and lifting it; then we proceed with the removal of the wheel. Once these steps have been carried out, we begin by unscrewing the hub nut and removing the caliper and brake disc block. In this way we have removed all the pieces that hinder the extraction of our transmission shaft, we begin to unscrew the shaft support nuts to begin to extract the shaft at both ends: one end must be removed from the gearbox while the other than the differential.


Posted on 30 July 2023 by ScegliAuto

Other guides that may interest you

How to reset the oil warning light on the Alfa Romeo Giulietta

If you want to manually reset the oil change light on your Alfa Romeo Giulietta then this guide is all you need. You do not need any diagnostic tools and will be able to complete the whole procedure without any difficulty. First, go inside the car and make sure it is completely turned off. Then keep the accelerator pedal pressed and at the same time press the brake pedal six times consecutively. When finished, keep both pedals pressed and turn on the ignition. Press the brake pedal again six more times and keep both pedals depressed for approximately 50 seconds. Turn off the ignition. Release the brake pedal and hold the accelerator pedal for another 50 seconds to complete the procedure.

Watch the video!


by ScegliAuto

More videos