Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Starter Motor from the Peugeot 307 1.6 HDI

Model: Peugeot 307 MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Starter motor

Video tutorial

Today's main steps will show you how to remove and replace the starter motor on the Peugeot 307 1.6 HDI. First, lift the vehicle and start unscrewing the fixing bolts of the bracket located next to the starter motor. Then, unscrew the fixing bolts of the starter motor and disconnect the power wiring to remove it, as shown in the video.

At this point, carry out the repair or replacement of the starter motor by installing the new original one. Finally, check the operation when starting the engine!


Updated on 14 October 2026 by ScegliAuto


Related tutorials

Replacing the Starter Motor of the Peugeot 307 2.0 HDI
Replacing the Starter Motor of the Peugeot 307 2.0 HDI
Peugeot 307 (2001-2009 / MK 1) Today's guide will provide you with the main information needed to dismantle and replace the starter motor of the Peugeot 307 2.0 HDI. First, open th…
How to Remove the Starter Motor from a Peugeot 307
How to Remove the Starter Motor from a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Is the starter motor showing no signs of operation? Here's how to remove it from the engine bay of the 307. Disconnect the starter motor power termin…
How to Replace the Timing Belt on a Peugeot 307 2.0 HDi
How to Replace the Timing Belt on a Peugeot 307 2.0 HDi
Peugeot 307 (2001-2009 / MK 1) Below we will discover how to disassemble and replace the timing belt on a Peugeot 307 2.0 HDi. First, lift the vehicle and start by removing the fro…

    Frequently Asked Questions

    • 307 2001-2009 - Where is the starter on the Peugeot 307 located? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos