Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to disassembling the engine block of the Peugeot Kisbee

Model: Peugeot Kisbee
Part: Engine

This video is currently unavailable

In this guide we will see the main instructions useful for disassembling the engine block from the frame of the Peugeot Kisbee scooter. First of all, we put the scooter on the central stand and start by opening the seat and removing the lower cover; then we proceed to disconnect all the cables, including the throttle cable and the cables related to the engine's power supply, as shown in the video.

At this point, we proceed with the disassembly of the engine block, disconnecting the suspension and finally the pin that holds the engine to the frame; if necessary, we carry out the entire engine block revision!


Posted on 10 July 2025 by ScegliAuto


Related tutorials

How do you replace the piston of the Peugeot Kisbee?
How do you replace the piston of the Peugeot Kisbee?
Kisbee In order to replace the piston of the Peugeot Kisbee, you need to loosen the screws that secure the engine block to its housing, so that it can be co…
How to Remove the Engine from a Peugeot Kisbee?
How to Remove the Engine from a Peugeot Kisbee?
Kisbee To remove the engine from a Peugeot Kisbee, you need to loosen the bolts that secure the engine block to its housing in the centre of the frame: for …
How to Dismantle the Engine of the Peugeot Kisbee?
How to Dismantle the Engine of the Peugeot Kisbee?
Kisbee To dismantle the engine block of the Peugeot Kisbee, first remove it from its housing: once the block has been removed, proceed to loosen the bolts t…

How to Change the Engine Oil on a BMW R1200T?

To change the engine oil on a BMW R1200T, follow these steps. Ensure the bike is on a level surface and the engine is warm but not too hot. Remove the oil filler cap and the oil drain plug, usually located on the underside of the engine. Position a collection container under the drain plug and unscrew it to fully drain the used oil. Once drained, remove and replace the oil filter, ensuring to clean the mounting surface thoroughly. Install the new filter and screw the oil drain plug back in. Fill the engine with new oil through the filler cap until reaching the recommended amount, checking the level with the dipstick if necessary. Secure both caps tightly. Start the engine for a few minutes to circulate the new oil, then turn it off, and the replacement is complete.

Watch the video!


by ScegliAuto

More videos