Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the piston of the Peugeot Kisbee?

Model: Peugeot Kisbee
Part: Checks and maintenance

Video tutorial

In order to replace the piston of the Peugeot Kisbee, you need to loosen the screws that secure the engine block to its housing, so that it can be completely removed: you will also need to free it from the intake and exhaust pipes, disconnecting the appropriate connectors.

Once the engine block has been freed, you can proceed by loosening the screws that secure the cylinder to the top of the engine block: when the cylinder has been removed, you can detach the underlying piston from the corresponding connecting rod, closing the engine block again.


Posted on 3 August 2025 by ScegliAuto


Related tutorials

How to Replace the Piston on a Peugeot Kisbee
How to Replace the Piston on a Peugeot Kisbee
Kisbee To replace the piston on a Peugeot Kisbee, completely remove the engine from its housing by taking off the side protective panels and freeing the eng…
How to Replace the Piston in a Peugeot Kisbee?
How to Replace the Piston in a Peugeot Kisbee?
Kisbee To replace the piston on the Peugeot Kisbee, completely remove the engine from its housing by taking off the side and front protective panels and fre…
How to replace the crankshaft bearing on a Peugeot Kisbee?
How to replace the crankshaft bearing on a Peugeot Kisbee?
Kisbee To replace the crankshaft bearing on a Peugeot Kisbee, you need to completely disassemble the engine block and transmission, removing both components…

How to change the engine oil of a Yamaha MT-07?

To change the engine oil of a Yamaha MT-07, follow these steps. Start by placing the bike on a flat surface and ensure the engine is warm but not too hot. Remove the oil cap from the top of the engine and unscrew the oil drain plug on the engine casing, usually located on the underside of the engine. Position a collection container under the drain plug and unscrew the plug to completely drain the used oil. Once drained, refit the drain plug. Remove and replace the oil filter using an oil filter spanner. Apply a little new oil to the seal of the new filter before installation. Fill the engine with new oil through the oil opening until reaching the recommended level. Check the oil level using the dipstick and add oil if necessary. Refit the oil cap and ensure it is securely tightened. Start the engine and let it run for a few minutes to distribute the oil, and you will have completed the procedure.

Watch the video!


by ScegliAuto

More videos