Do it yourself
Frequently asked questions about cars and motorcycles

Model: Peugeot Django
Part: Engine oil

To replace the motor oil of the Peugeot Django, you need to loosen the drain plug of the oil tank located in the central lower part of the motorcycle: once the plug is unscrewed, you can collect all the used oil in a properly positioned container. Once all the oil has drained out, you can close the drain plug and top up with the necessary amount of motor oil: this should be poured through the breather located on the right side of the motorcycle, next to the exhaust terminal.

Posted on 20 September 2025 by ScegliAuto

This video is currently unavailable

Related tutorials

Django To change the transmission oil on the Peugeot Django, you need to loosen the drain plug of the transmission, which is located at the bottom of the co…
Django In order to replace the oil filter of the Peugeot Django, you need to loosen the drain plug of the oil pan, located in the central bottom part of the…
Django To replace the engine oil on a Peugeot Django, you need to unscrew the drain plug located at the lower central area of the bike. Once the plug is rem…

How to Replace the Front Headlight on the Husqvarna 701?

In this tutorial, you will see how to replace the front headlight on the Husqvarna 701, a very simple and quick operation. First, ensure that the key is not inserted, then position yourself in front of the motorcycle, locate the four bolts on either side of the headlamp, and unscrew them using a Torx T30 key. Next, pull the entire assembly towards you, separate it from the support, and disconnect the power connector. At this point, you can separate the headlight from the panel, position the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos