Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the stand of the Peugeot Kisbee?

Model: Peugeot Kisbee
Part:

Video tutorial

It will be possible to replace the stand of the Peugeot Kisbee 50 by loosening the screws that fix the side panel of the footrest compartment, where the stand itself is located: once the screws are removed, it will be possible to proceed by detaching the panel so that access to the fixing screws of the stand itself is obtained.

By loosening and removing these screws, it will be possible to completely detach it so that the new one can be positioned: this can now be fixed by inserting the side panel again and checking that it works.


Posted on 5 November 2025 by ScegliAuto


Related tutorials

Replacing the Exhaust on a Peugeot Kisbee 50cc
Replacing the Exhaust on a Peugeot Kisbee 50cc
Kisbee In this video tutorial, you will learn how to remove and replace the exhaust end or the entire exhaust system on a Peugeot Kisbee 50cc scooter, follo…
How to Replace the Gear Oil of the Peugeot Kisbee 4T 2020
How to Replace the Gear Oil of the Peugeot Kisbee 4T 2020
Kisbee This guide explains how to replace the transmission oil of the Peugeot Kisbee 50 4-stroke, 2020 model. First, place your scooter on the centre stand …
How do you replace the transmission of the Peugeot Kisbee?
How do you replace the transmission of the Peugeot Kisbee?
Kisbee In order to replace the transmission of the Peugeot Kisbee, you need to loosen the screws that secure the specific casing, located on the left side o…

How to Change the Engine Oil on a BMW R1200T?

To change the engine oil on a BMW R1200T, follow these steps. Ensure the bike is on a level surface and the engine is warm but not too hot. Remove the oil filler cap and the oil drain plug, usually located on the underside of the engine. Position a collection container under the drain plug and unscrew it to fully drain the used oil. Once drained, remove and replace the oil filter, ensuring to clean the mounting surface thoroughly. Install the new filter and screw the oil drain plug back in. Fill the engine with new oil through the filler cap until reaching the recommended amount, checking the level with the dipstick if necessary. Secure both caps tightly. Start the engine for a few minutes to circulate the new oil, then turn it off, and the replacement is complete.

Watch the video!


by ScegliAuto

More videos