Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rollers in the Variator of a Peugeot Speedfight 2

Model: Peugeot Speedfight 2
Part:

Video tutorial

In this guide, we will discover the instructions to disassemble and replace the rollers in the variator of the Peugeot Speedfight 2 scooter. First, place the scooter on the centre stand and start unscrewing the fixing screws of the side cover of the transmission to remove it; then unscrew the central nut of the fan to remove it as well, disconnecting the drive belt.

At this point, remove the variator, replacing the rollers found inside; then reassemble the transmission, replacing the belt if necessary, and finally secure the outer cover.


Posted on 18 June 2026 by ScegliAuto


Related tutorials

How to Replace the Variator and Rollers on the Peugeot Speedfight 2
How to Replace the Variator and Rollers on the Peugeot Speedfight 2
Speedfight 2 Today, we will see in this video tutorial how to disassemble and replace the variator and rollers on the Peugeot Speedfight 2 scooter in simple steps…
How to remove the variator and clutch from a Peugeot Speedfight 2
How to remove the variator and clutch from a Peugeot Speedfight 2
Speedfight 2 In this guide, learn how to remove and replace various transmission components, including the variator, clutch, and belt, on the Peugeot Speedfight 2…
How to replace the exhaust on a Peugeot Speedfight?
How to replace the exhaust on a Peugeot Speedfight?
Speedfight 2 To replace the exhaust on a Peugeot Speedfight 2, loosen the screws that secure it to the appropriate supports on the right side of the scooter near …

How to Replace the USB Socket on the Benelli TRK 502?

To replace the USB socket on the Benelli TRK 502, loosen the screws securing the left side panel of the motorcycle, located just below the handlebars: once this panel is freed, you can remove it and locate the USB socket connector. By disconnecting this connector, you can pull the socket out of its housing: then connect the new socket to the connector, inserting it into its housing. After installation, check that the socket works by reinstalling the panel.

Watch the video!


by ScegliAuto

More videos