Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Variator and Rollers on the Peugeot Speedfight 2

Model: Peugeot Speedfight 2
Part:

Video tutorial

Today, we will see in this video tutorial how to disassemble and replace the variator and rollers on the Peugeot Speedfight 2 scooter in simple steps. First, place your scooter on the centre stand and start unscrewing the fixing screws found on the sides of the transmission cover; once the cover is removed, unscrew the nut of the fan and then that of the clutch bell, thus removing the belt, as shown in the video.

At this point, also remove the variator, replacing the rollers found inside; apply the reverse procedure for reassembly!


Updated on 25 May 2026 by ScegliAuto


Related tutorials

How to Replace the Rollers in the Variator of a Peugeot Speedfight 2
How to Replace the Rollers in the Variator of a Peugeot Speedfight 2
Speedfight 2 In this guide, we will discover the instructions to disassemble and replace the rollers in the variator of the Peugeot Speedfight 2 scooter. First, p…
How to remove the variator and clutch from a Peugeot Speedfight 2
How to remove the variator and clutch from a Peugeot Speedfight 2
Speedfight 2 In this guide, learn how to remove and replace various transmission components, including the variator, clutch, and belt, on the Peugeot Speedfight 2…
How to Replace the Transmission on the Peugeot Speedfight 2?
How to Replace the Transmission on the Peugeot Speedfight 2?
Speedfight 2 To replace the transmission on the Peugeot Speedfight 2, loosen the screws securing the transmission protection panel located on the left side of the…

How to change the engine oil on the Aprilia Shiver 900?

To change the engine oil on the Aprilia Shiver 900, loosen the screws that secure the engine guard located at the bottom of the vehicle: once the screws are loosened, you can detach it and locate the drain plug of the oil sump. By removing this plug, you can collect all the used oil in a suitably placed container; at this point, allow all the oil to drain and remove the filter located at the bottom of the bike. Once the filter is replaced, top up the oil through the breather located on the right side of the bike.

Watch the video!


by ScegliAuto

More videos