Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video tutorial, you will learn how to remove the front wheel and replace the tyre on a Peugeot Speedfight 2 scooter in simple steps. First, position your scooter on the centre stand and remove the front wheel; to do this, unscrew the three wheel bolts using a socket spanner with an extension, as shown in the video. At this point, deflate the tyre and use levers to remove the tyre from the rim; insert the new tyre from one side first, then lever it on until it is correctly seated!

Updated on 17 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Speedometer Cable on the Peugeot Speedfight 2
Speedfight 2 Briefly review the steps to remove and replace the speedometer cable on the Peugeot Speedfight 2 scooter. First, place your scooter on the centre sta…
How do you replace the brake pads of the Peugeot Speedfight 2?
How do you replace the brake pads of the Peugeot Speedfight 2?
Speedfight 2 In order to replace the brake pads of the Peugeot Speedfight 2, the same procedure will need to be carried out for both the front wheel and the rear …
How to Replace the Brake Pads on the Peugeot Speedfight 2
How to Replace the Brake Pads on the Peugeot Speedfight 2
Speedfight 2 In today's tutorial video, see how to remove and replace the front and rear brake pads on the second series Peugeot Speedfight scooter. First, start …

How to Turn Off the "V-Belt" Warning Light on a Yamaha X-MAX 400 Scooter?

In this tutorial, learn how to turn off the "V-Belt" warning light on the Yamaha X-MAX scooter's instrument panel, a very simple and quick operation. Before doing this, ensure you have completed the required maintenance, specifically replacing the drive belt. Start by inserting the key and turning on the ignition, then open the small right glove compartment and unscrew the screw for the upper cover. Once removed, locate the white connector with a jumper attached, disconnect it, wait about 10 seconds, and reconnect it. If successful, the warning light will disappear.

Watch the video!


by ScegliAuto

More videos