Do it yourself
| ||||
|
Model: Peugeot Django
To install the windshield on a Peugeot Django you have to remove the mirrors, holding the nut between the knob and the brake caliper still, and turning the mirror itself. At this point, you need to mount the bracket by inserting its supports inside the mirror housing and inserting a washer under the handlebar cover. Now it will be possible to re-insert the mirrors and their nuts. To mount the windshield it will be necessary to install the fixing caps on the brackets which will act as a pivot for the bolts with rubber pads installed on the windshield itself.
Posted on 10 April 2024 by ScegliAuto
|
How are the valves of the Malaguti Dune 125 adjusted?To be able to adjust the valves of the Malaguti Dune 125 it is necessary to first remove the saddle and the tank by loosening the appropriate bolts. Once the two parts have been removed, it will be possible to access the underlying components: it will be necessary to open the upper cover of the crankcase inside which the valves are located. These can be checked by inserting a thickness gauge inside them. If the valve is wide, it will have to be tightened and vice versa it will have to be loosened. Once the valves have been checked, it will be possible to close the crankcase again and install all the parts previously removed. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |