Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light on a Peugeot Vivacity?

Model: Peugeot Viva City
Part: Light bulb

Video tutorial

To replace the rear light on a Peugeot Vivacity, lift the seat and remove the two screws securing it to the scooter. Next, loosen the three screws located under the glove compartment, as shown in the video.

Then, remove the oil and fuel caps to take off the cover surrounding them. Consequently, unscrew the bolts beneath the cover to slide out the light and disconnect its connectors.

Once the light has been removed, you can replace it by refitting all the previously removed parts.


Updated on 12 May 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Rear Suspension of the Peugeot Vivacity
Guide to Replacing the Rear Suspension of the Peugeot Vivacity
Viva City This guide will show you the main steps to remove and replace the rear suspension of the Peugeot Vivacity. First, place your scooter on the centre st…
How to Replace the Transmission on a Peugeot Vivacity?
How to Replace the Transmission on a Peugeot Vivacity?
Viva City To replace the transmission on a Peugeot Vivacity, you need to loosen the bolts securing the transmission casing located on the left side of the scoo…
How to Dismantle the Engine of the Peugeot Vivacity?
How to Dismantle the Engine of the Peugeot Vivacity?
Viva City To dismantle the engine of the Peugeot Vivacity, loosen the screws that secure it to its housing located at the rear of the frame. Once the engine bl…

How to Change the Engine Oil in the KTM Duke 390?

In this tutorial, you can see how to change the engine oil in the KTM Duke 390, a very simple and quick operation. First, ensure the engine is cool enough, then remove the lower protective cover and place a container underneath the bike. Next, locate the drain bolt, unscrew it with an 18mm socket spanner, and let all the oil in the system drain out. At this point, you can open the filter housing, remove the old filter, and insert the replacement. Finally, reassemble everything and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos