Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulbs on the Peugeot Citystar 125 Scooter

Model: Peugeot Citystar 125
Part: Tail light bulb

Video tutorial

In this tutorial, see how to replace the rear light bulbs on the Peugeot Citystar 125 scooter, a very simple and quick operation. First, ensure the key is not inserted, then go to the back of the scooter, locate the two screws at the ends of the central light and unscrew them with a simple cross-head screwdriver.

Next, remove the various front lenses, grasp the faulty bulb and detach it from the base by turning it slightly counter-clockwise. Finally, insert the new bulbs and reassemble everything by following the reverse procedure.


Updated on 11 July 2026 by ScegliAuto


Related tutorials

How to Replace the Fuel Pump Diaphragm on Peugeot Citystar 125
How to Replace the Fuel Pump Diaphragm on Peugeot Citystar 125
Citystar 125 In this tutorial video, see how to disassemble and replace the fuel pump diaphragm on the Peugeot Citystar 125 scooter. First, place your scooter on …
How to Top Up the Brake Fluid on the Peugeot Citystar 125?
How to Top Up the Brake Fluid on the Peugeot Citystar 125?
Citystar 125 To top up the brake fluid on the Peugeot Citystar 125, cover the handles and levers with a cloth to prevent them from getting dirty with oil. Next, l…
How to Replace the Fuel Pump on a Peugeot Citystar 125?
How to Replace the Fuel Pump on a Peugeot Citystar 125?
Citystar 125 To replace the fuel pump on a Peugeot Citystar 125, remove the protective panel located in the footwell of the bike and the one at the base of the se…

How to Raise and Lower the Screen on the Yamaha X-MAX 125

In this video, you can see how to raise or lower the front screen of the Yamaha X-MAX 125 scooter: note that there are two visible screws on the transparent part that you need to unscrew. Then, remove the two plastic seals that protect the other screws, which you will find underneath them. Unscrew these as well and then take off the transparent screen. Remove the metal screws underneath and reposition the transparent part according to your needs; there are four screws on each side that allow for a certain range of movement, both up and down. Refit the plastic seal, securing it with its fixing screw, and the job is complete.

Watch the video!


by ScegliAuto

More videos