Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this guide, we will go through the steps to remove and replace the spark plug on the engine of the Peugeot Elyseo 125 scooter. First, place the scooter on its centre stand and start by removing the under-seat storage compartment. Next, disconnect the spark plug's electrical connector using a socket wrench with an extension to unscrew and remove it, as shown in the video. At this point, install the new spark plug of the correct type and with the same thread pitch; screw it in by hand and then tighten gently with the wrench, following the video tutorial until the end!

Updated on 17 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the engine oil on the Peugeot Elyseo 125?
How to change the engine oil on the Peugeot Elyseo 125?
Elyseo 125 You can change the engine oil on the Peugeot Elyseo 125 by loosening the drain plug located at the central lower part of the scooter. Once this plug …
How do you replace the motor oil of the Peugeot Elyseo 125?
How do you replace the motor oil of the Peugeot Elyseo 125?
Elyseo 125 To replace the engine oil of the Peugeot Elyseo 125, you need to unscrew the drain plug located in the central lower part of the motorcycle: once thi…
How to Change the Engine Oil of the Peugeot Elyseo 125
How to Change the Engine Oil of the Peugeot Elyseo 125
Elyseo 125 Briefly see how to perform the routine maintenance service on the Peugeot Elyseo 125 scooter by changing the engine oil and oil filter. First, place …

How to Turn Off the "V-Belt" Warning Light on a Yamaha X-MAX 400 Scooter?

In this tutorial, learn how to turn off the "V-Belt" warning light on the Yamaha X-MAX scooter's instrument panel, a very simple and quick operation. Before doing this, ensure you have completed the required maintenance, specifically replacing the drive belt. Start by inserting the key and turning on the ignition, then open the small right glove compartment and unscrew the screw for the upper cover. Once removed, locate the white connector with a jumper attached, disconnect it, wait about 10 seconds, and reconnect it. If successful, the warning light will disappear.

Watch the video!


by ScegliAuto

More videos