Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Peugeot V Clic
Part:

Today's instructions will illustrate the procedure for removing and replacing the variator and its rollers on the Peugeot V-Clic scooter. First, place the scooter on the centre stand and start unscrewing the fastening screws of the transmission cover to remove it; then unscrew the nut of the fan to take it off, subsequently disassembling the clutch bell and the drive belt, as shown in the video. At this point, replace the variator rollers or the entire transmission assembly, then reassemble all components in order, following the video tutorial until the end!

Updated on 7 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front fork seals of the Peugeot V Clic 50
How to replace the front fork seals of the Peugeot V Clic 50
V Clic .. the seals of the front fork of the Peugeot V Clic 50 scooter. First, we put the scooter on the central stand and start by removing the front wheel.. …

How to Replace and Install the Front Wheel on a Beta RR 300

Today, we will go through the instructions to install or replace the front wheel on the Beta RR 300 enduro bike by following these simple steps. First, place your bike on a stand and lift the front wheel off the ground. Next, unscrew the fixing bolts of the front brake caliper to remove it. At this point, unscrew the central axle of the wheel, removing and possibly replacing the tyre. Then, tighten the fork nuts and reassemble everything by reversing the disassembly procedure!

Watch the video!


by ScegliAuto

More videos