Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on the Peugeot Kisbee

Model: Peugeot Kisbee
Part: Battery

Video tutorial

To replace the battery on the Peugeot Kisbee, you need to pry off the panel located in the centre of the footrest of the scooter using a tool. Once this panel is removed, you can access the battery underneath, which will be disconnected from the terminals and freed from the securing screws.

This will allow you to insert the new battery, securing it properly with screws and reconnecting the power cables. After installation, check that everything functions correctly.


Updated on 15 September 2026 by ScegliAuto


Related tutorials

Where is the battery located in the Peugeot Kisbee 50 scooter?
Kisbee In this video, you can see where the battery is located in the Peugeot Kisbee 50 scooter, useful in case you need to replace it, a very simple and qu…
How to Replace the Ignition Fuse on a Peugeot Kisbee
How to Replace the Ignition Fuse on a Peugeot Kisbee
Kisbee In this video tutorial, you will learn how to remove and replace the ignition fuse on the Peugeot Kisbee 50 cc scooter, as well as on the 125 cc mode…
How to Remove the Variator Cover from a Peugeot Kisbee
How to Remove the Variator Cover from a Peugeot Kisbee
Kisbee Before starting, dismount from your Peugeot Kisbee, position it on its central stand, and if possible, lift it. The variator cover is secured in plac…

How to change the engine oil of a Yamaha MT-07?

To change the engine oil of a Yamaha MT-07, follow these steps. Start by placing the bike on a flat surface and ensure the engine is warm but not too hot. Remove the oil cap from the top of the engine and unscrew the oil drain plug on the engine casing, usually located on the underside of the engine. Position a collection container under the drain plug and unscrew the plug to completely drain the used oil. Once drained, refit the drain plug. Remove and replace the oil filter using an oil filter spanner. Apply a little new oil to the seal of the new filter before installation. Fill the engine with new oil through the oil opening until reaching the recommended level. Check the oil level using the dipstick and add oil if necessary. Refit the oil cap and ensure it is securely tightened. Start the engine and let it run for a few minutes to distribute the oil, and you will have completed the procedure.

Watch the video!


by ScegliAuto

More videos