Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. Peugeot 301
    4. : Warning light – error code

Peugeot 301 - Warning light – error code

Warning Light – Error Code Peugeot 301 (2012-2019 / mk 1)

Peugeot 301 (2012-2019 / MK 1)
How to Reset the Service Light on the Peugeot 301
After changing the oil and filter on this vehicle, you need to reset the service light that has illuminated on the dashboard. To do this, follow the …Read all…
Posted on 19 September 2026 by ScegliAuto
Peugeot 301 (2012-2019 / MK 1)
How to Reset the Maintenance Light on a Peugeot 301
To reset the maintenance light (or service light) on your Peugeot 301, follow these simple steps. First, sit inside your vehicle and ensure the ignition is …Read all…
Posted on 31 July 2026 by ScegliAuto
Car stereo (2) Battery (2) Spark plugs (1) Timing belt (1) Tail light (3) Air filter (1) Cabin air filter (4) Headlight bulb (2) Engine oil (2) Door trim panel (1) Rear bumper (1) Brake pads (1) Fuse box (8) Seat (1) AdBlue warning light (1) Warning light – error code (2) (4) Tire pressure warning light (1) Service warning light (7)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos