Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. Peugeot 301
    4. : Tail light

Peugeot 301 - Tail light

Tail Light Peugeot 301 (2012-2019 / mk 1)

Peugeot 301 (2012-2019 / MK 1)
How to Remove and Replace the Rear Headlight of the Peugeot 301
In this brief and simple guide, you will learn how to remove and replace the rear headlight and its bulbs on the Peugeot 301. First, open the trunk and start …Read all…
Posted on 25 September 2026 by ScegliAuto
Peugeot 301 (2012-2019 / MK 1)
How to Replace the Tail Lights on a Peugeot 301?
In this tutorial, you will learn how to replace the tail lights on a Peugeot 301, a very simple and quick operation. First, ensure that the key is not in the …Read all…
Posted on 22 September 2026 by ScegliAuto
Peugeot 301 (2012-2019 / MK 1)
How to Remove the Rear Light of the Peugeot 301
Follow these steps to remove and replace the rear light and its bulbs on the Peugeot 301. First, open the trunk and disconnect the electrical connector for the …Read all…
Posted on 28 August 2026 by ScegliAuto
Car stereo (2) Battery (2) Spark plugs (1) Timing belt (1) Tail light (3) Air filter (1) Cabin air filter (4) Headlight bulb (2) Engine oil (2) Door trim panel (1) Rear bumper (1) Brake pads (1) Fuse box (8) Seat (1) AdBlue warning light (1) Warning light – error code (2) (4) Tire pressure warning light (1) Service warning light (7)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos