Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Tail Lights on a Peugeot 301?

Model: Peugeot 301 MK 1 - Years 2012-2019
Part: Tail light

In this tutorial, you will learn how to replace the tail lights on a Peugeot 301, a very simple and quick operation. First, ensure that the key is not in the ignition. Then, open the trunk, remove the plastic rivets located at the back of the light in question, and detach the cover. Next, remove the two indicated mounting nuts, disconnect the power connector, and pull it outward to separate the light assembly from the body. At this point, you can transfer the bulbs to the replacement if necessary, and follow the reverse procedure.

Updated on 22 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Cabin Air Filter of the Peugeot 301
Replacing the Cabin Air Filter of the Peugeot 301
Peugeot 301 (2012-2019 / MK 1) Follow this guide to remove and replace the cabin air filter of the Peugeot 301. First, get inside the vehicle on the front passenger side and remove…
Where is the fuse box of the Peugeot 301 located?
Where is the fuse box of the Peugeot 301 located?
Peugeot 301 (2012-2019 / MK 1) The box containing all the various fuses for your Peugeot 301 is located inside the cabin. To be able to locate it and have easy access to the fuses,…
How to Replace the Radio in the Peugeot 301?
How to Replace the Radio in the Peugeot 301?
Peugeot 301 (2012-2019 / MK 1) To replace the radio in the Peugeot 301, pry underneath the trim that surrounds the radio display to detach it from its housing and disconnect the un…

Other guides you may be interested in

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos