Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light of the Peugeot 301

Model: Peugeot 301 MK 1 - Years 2012-2019
Part: Tail light

Follow these steps to remove and replace the rear light and its bulbs on the Peugeot 301. First, open the trunk and disconnect the electrical connector for the bulbs located at the back. Then, unscrew the plastic screws of the light assembly to remove it, as shown in the video. At this point, gently remove the light assembly from the exterior. Remove the bulb holder to access the bulbs (replace any faulty ones if necessary), applying the reverse procedure for reassembly!

Updated on 28 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble and replace the rear headlight of the Peugeot 301
How to disassemble and replace the rear headlight of the Peugeot 301
Peugeot 301 (2012-2019 / MK 1) In this short and simple guide, we will see how to disassemble and replace the rear light and its bulbs of the Peugeot 301. First, open the rear door…
How to Replace the Tail Lights on a Peugeot 301?
How to Replace the Tail Lights on a Peugeot 301?
Peugeot 301 (2012-2019 / MK 1) In this tutorial, you will learn how to replace the tail lights on a Peugeot 301, a very simple and quick operation. First, ensure that the key is no…
How to Remove the Rear Bumper of the Peugeot 301
How to Remove the Rear Bumper of the Peugeot 301
Peugeot 301 (2012-2019 / MK 1) Today, we will see in this video tutorial how to remove and replace the rear bumper of the Peugeot 301 in simple and quick steps. First, open the tru…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos