Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 301
    4. : How to disassemble and replace the rear headlight of the Peugeot 301

Peugeot 301 - Video tutorial

Model: Peugeot 301 MK 1 - Years 2012-2019
Part: Tail light
Operation: How to disassemble and replace the rear headlight of the Peugeot 301

In this short and simple guide, we will see how to disassemble and replace the rear light and its bulbs of the Peugeot 301. First, open the rear door of the trunk and start removing the plastic cover behind the taillight; then disconnect the electrical connector of the bulbs and unscrew the plastic screws to remove the light from the outside, as shown in the video. At this point, replace if necessary the faulty bulbs or directly the entire light; reattach it to the body and make the electrical connection!


Posted on 11 April 2024 by ScegliAuto

Replace the steering angle sensor on the Volkswagen Golf 5

When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components.

Watch the video!


by ScegliAuto

More videos