Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb in a Peugeot 301

Model: Peugeot 301 MK 1 - Years 2012-2019
Part: Headlight bulb

Let's see in this short and simple guide how to remove and replace the headlight bulb in a Peugeot 301 by following the instructions below. First, open the hood of your vehicle and start by removing the rubber protective cap of the bulbs, which is located at the back of the headlight; then unclip the metal spring to remove the bulb from the headlight, disconnecting the electrical connector, as shown in the video. At this point, replace the low beam bulb with a new one of type H7, also replacing the position light!

Updated on 30 June 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Headlight Bulb on a Peugeot 301
How to Replace the Headlight Bulb on a Peugeot 301
Peugeot 301 (2012-2019 / MK 1) If you need to replace a headlight bulb on your vehicle, follow the instructions below and check out the video. After opening the hood, locate the he…
How to Replace the Cabin Air Filter on a Peugeot 301?
How to Replace the Cabin Air Filter on a Peugeot 301?
Peugeot 301 (2012-2019 / MK 1) To replace the cabin air filter on a Peugeot 301, detach the plastic cover from the lower footwell on the passenger side: after removing this cover, …
How do you reset the tire pressure warning light on the Peugeot 301?
How do you reset the tire pressure warning light on the Peugeot 301?
Peugeot 301 (2012-2019 / MK 1) The tire pressure warning light that appears on the instrument panel of the Peugeot 301 can be reset by inflating the tires to the recommended pressu…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos