Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on a Peugeot 301

Model: Peugeot 301 MK 1 - Years 2012-2019
Part: Headlight bulb

If you need to replace a headlight bulb on your vehicle, follow the instructions below and check out the video. After opening the hood, locate the headlight with the bulb to be replaced and reach behind to remove the plastic protective cap. Then, disconnect the power connector and unlock the bulb by twisting it. Carefully take the new bulb, avoiding touching the glass with your fingers, and place it in the housing. Reconnect the power connector and reattach the plastic cap.

Updated on 29 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb in a Peugeot 301
Peugeot 301 (2012-2019 / MK 1) Let's see in this short and simple guide how to remove and replace the headlight bulb in a Peugeot 301 by following the instructions below. First, op…
How to disassemble and replace the rear headlight of the Peugeot 301
How to disassemble and replace the rear headlight of the Peugeot 301
Peugeot 301 (2012-2019 / MK 1) In this short and simple guide, we will see how to disassemble and replace the rear light and its bulbs of the Peugeot 301. First, open the rear door…
How to Remove the Rear Light of the Peugeot 301
How to Remove the Rear Light of the Peugeot 301
Peugeot 301 (2012-2019 / MK 1) Follow these steps to remove and replace the rear light and its bulbs on the Peugeot 301. First, open the trunk and disconnect the electrical connect…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos