Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Peugeot 308?

Model: Peugeot 308 T9, MK 2 - Years 2013-2021
Part: Service warning light

The procedure to reset the Service light that will appear on the instrument panel of the Peugeot 308 involves holding down the button on the right side of the panel while it is turned off. By continuing to hold down the button, it will be possible to insert the ignition key into the slot and turn it. In this way, a countdown will appear starting from ten: the button must be held down until the light disappears completely. At the end of the operation, it will be possible to turn off the instrument panel and check that everything is working.

Posted on 5 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Peugeot 308?
How to Reset the Service Light on a Peugeot 308?
Peugeot 308 (2013-2021 / T9, MK 2) On the Peugeot 308, reset the Service light by pressing and holding the button located on the right side of the instrument cluster, where three 0s ar…
How to Reset the Service Light on a Peugeot 308?
How to Reset the Service Light on a Peugeot 308?
Peugeot 308 (2007-2014 / T7, MK 1) From the instrument cluster of the Peugeot 308, you can completely clear the Service light that appears by pressing and holding the button located on…
How do you reset the Service light on the Peugeot 308?
How do you reset the Service light on the Peugeot 308?
Peugeot 308 (2007-2014 / T7, MK 1) The Service light that is shown on the instrument panel of the Peugeot 308 can be reset by holding down the button on the right side of the instrumen…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos