Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the interior light bulb of the Peugeot 206.

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Interior dome light bulb

Today we will discover the instructions that will show us how to disassemble and replace the bulb of the interior light of the Peugeot 206. First of all, we get on board the interior and start levering on the plastic light to detach and remove it; disconnect the electrical connector of the interior light bulb, as shown in the video. At this point, we remove the light of the interior light to replace it with the new one, of the right type and with the same attachment; finally, we reassemble and connect the interior light on the ceiling, following the video tutorial until the end!

Posted on 20 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Interior Light Bulb of a Peugeot 206?
How to Replace the Interior Light Bulb of a Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) To replace the interior light bulb of a Peugeot 206, use a screwdriver to lever and extract the light from its housing. Next, disconnect the connecto…
Replacing Interior Light Bulb on Peugeot 206
Replacing Interior Light Bulb on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Want to replace the damaged bulbs inside the interior light of your car? Here’s how to remove the interior light and the bulbs from the 206. Pry betw…
How do you replace the interior light bulb of the Peugeot 206?
How do you replace the interior light bulb of the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) In order to replace the bulb of the interior lights of the Peugeot 206, you need to pry it out with an object so that the light fixture can be remove…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos