Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of a Peugeot 5008 key

Model: Peugeot 5008 MK 2 - Years 2017-2024
Part: Key

In the video in question, you can observe the procedure to replace the battery of the key fob for a Peugeot 5008 vehicle. To access the battery compartment, you will first need to remove the metal key inside the key fob. To do this, simply slide the lever on the front end of the casing and then pull it outwards. Next, use a small flathead screwdriver and insert the tip into the groove on the top edge; lever to open the casing and then proceed to remove the battery.

Posted on 30 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Peugeot 5008 remote control
How to replace the battery of the Peugeot 5008 remote control
Peugeot 5008 (2017-2024 / MK 2) Replacing the battery inside the remote control of your Peugeot 5008 is really very simple and to complete the operation, just follow the procedure d…
How to replace the battery of the Peugeot 5008 key
Peugeot 5008 (2017-2024 / MK 2) The replacement of the battery of a Peugeot 5008 key follows some very simple steps. The first step to be performed is to remove the metal key, to do…
How to replace the remote battery in the Peugeot 5008?
Peugeot 5008 (2009-2016 / MK 1) In this tutorial, you will see how to replace the remote battery of the Peugeot 5008, a very simple and quick operation. For this, you will need a re…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos