Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Key Battery on a Peugeot 5008

Model: Peugeot 5008 MK 2 - Years 2017-2024
Part: Key

On the Peugeot 5008, the operation is carried out entirely on the key, without needing to intervene on the car. Start by examining the remote control and locating the point to lever open the shell: the content clearly shows the use of the integrated metal key or a small tool to separate the two halves of the cover. Once the key of the Peugeot 5008 is opened, the button cell battery becomes visible inside the housing. The used battery is carefully removed, leveraging gently to avoid forcing the contacts. Immediately after, the new battery is shown, which is inserted respecting the correct orientation, as seen in the video. Once the battery is inserted, close the key shell on the Peugeot 5008, rejoining the two halves until the final click. The content notes the final check: the key is pressed to verify that the LED/functionality has returned to normal, indicating that the replacement has been successful.

Posted on 19 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Peugeot 5008 key
Peugeot 5008 (2017-2024 / MK 2) The replacement of the battery of a Peugeot 5008 key follows some very simple steps. The first step to be performed is to remove the metal key, to do…
Replacing the battery of the Peugeot 5008 key remote.
Replacing the battery of the Peugeot 5008 key remote.
Peugeot 5008 (2017-2024 / MK 2) In today's video, we will go through the steps on how to disassemble and replace the battery of the key remote for the Peugeot 5008. First, we take o…
How to Change the Battery in a Peugeot 5008
How to Change the Battery in a Peugeot 5008
Peugeot 5008 (2009-2016 / MK 1) Is the battery in your Peugeot 5008 damaged? Here’s how to change it. Open the car door and pull up the engine compartment release lever located at t…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos