Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the "Service" light on a Peugeot Expert?

Model: Peugeot Expert Mark2, MK 2 - Years 2008-2016
Part: Service warning light

To reset the "Service" light on a Peugeot Expert, start by turning on the instrument panel without starting the engine. Find the button located under the panel and hold it down for a few seconds. While holding down this button, you will see some service options appear on the display. Continue holding down until a countdown or a message confirming the start of the reset procedure appears. Once the countdown is complete, the "Service" light should turn off. If the procedure was successful, the onboard computer will show that the reset has been performed and the next maintenance interval on the odometer will be updated. You can confirm the success of the process by turning off and on the instrument panel.

Posted on 2 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on Peugeot Expert 3
How to Reset the Service Light on Peugeot Expert 3
Peugeot Expert (2016-2025 / Mark3, MK 3) If you own a third series Peugeot Expert and the service light continues to appear on the instrument panel even after performing the vehicle service,…
How to Reset the Engine Oil Warning Light on the Peugeot Expert
How to Reset the Engine Oil Warning Light on the Peugeot Expert
Peugeot Expert (2008-2016 / Mark2, MK 2) Today, we will discover the necessary procedure to reset the service warning light for the oil change on the Peugeot Expert. First, get in the vehicl…
How to Reset the Service Light on the Peugeot Expert?
How to Reset the Service Light on the Peugeot Expert?
Peugeot Expert (2008-2016 / Mark2, MK 2) To reset the service light on the Peugeot Expert, press and hold the button located on the right side of the instrument panel while it is off. Next, …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos