Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the rear headlight bulb of the Peugeot 107?

Model: Peugeot 107 MK 1 - Years 2005-2014
Part: Tail light

In order to replace the rear headlight bulb of the Peugeot 107, you need to open the rear hatch so that you can locate the screws that secure the optical group laterally: these screws can then be loosened so that the optical group can be removed. By disconnecting the connector on the inside, you can remove the headlight and remove the bulb inside it; once the old bulb has been removed, you can insert the new one and check that everything works correctly.

Posted on 12 November 2024 by ScegliAuto

Video tutorial

Related tutorials

Removing Rear Lights on Peugeot 107
Removing Rear Lights on Peugeot 107
Peugeot 107 (2005-2014 / MK 1) Lift the rear hatch to access the rear light on a Peugeot 107, then locate the screws to remove. Unscrew the screws on the plastic of the light using…
How to Replace the Front Headlamp Bulb of a Peugeot 107
How to Replace the Front Headlamp Bulb of a Peugeot 107
Peugeot 107 (2005-2014 / MK 1) Before starting, open the front bonnet of your Peugeot 107. Begin by unscrewing and removing the screw that secures the connector located behind the …
How to Replace the Front Headlamp Bulb on the Peugeot 107?
How to Replace the Front Headlamp Bulb on the Peugeot 107?
Peugeot 107 (2005-2014 / MK 1) To replace the front headlamp bulb on the Peugeot 107, open the bonnet to access the bolts located at the top of the headlamp. Once these bolts are l…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos