Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD Port in the Peugeot Partner Van?

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Checks and maintenance

See other generations:
Video tutorial

In this video, you can see where the OBD port is located in the Peugeot Partner van, useful if you need to check the error codes stored in the ECU using the appropriate scanner. As shown, the diagnostic port is positioned inside the cabin, specifically below the steering column.

To access it, simply open the fuse box cover and remove the entire cover of the steering column. Before connecting the scanner, ensure that the pins of both connectors are in good condition; otherwise, you could damage the ECU.


Updated on 5 November 2026 by ScegliAuto


Related tutorials

Where is the OBD Port on a 2015 Peugeot Partner?
Where is the OBD Port on a 2015 Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) To find the OBD port inside your Peugeot Partner, it only takes a few seconds. All you need to do is carefully read the following guide and follow th…
Wiring Diagram for the Peugeot Partner Van
Wiring Diagram for the Peugeot Partner Van
Peugeot Partner Tepee (2008-2018 / B9) In this valuable video, you can find the complete wiring diagram for the Peugeot Partner Van, including wiring indications and a series of handwritte…
Where is the heating resistor located in the Peugeot Partner van?
Where is the heating resistor located in the Peugeot Partner van?
Peugeot Partner Tepee (2008-2018 / B9) In this video, you can see where the heating resistor is located in the Peugeot Partner van and how to proceed if you need to replace it, a very simp…

    Frequently Asked Questions

    • Partner Tepee 2008-2018 - Where is the Peugeot Partner jack located? Read answer

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos