Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the high beam bulb of the Peugeot Rifter

Model: Peugeot Rifter MK 1 - Years 2018-2026
Part: Headlight bulb

If you own a Peugeot Rifter and want to replace one of the high beam bulbs, all you have to do is follow the steps described in the following guide. First, make sure the vehicle is completely turned off, then lift the front hood and insert the safety hook correctly. Next, remove the dust cap located behind the front headlight and disconnect the electrical connector. Finally, remove the bulb holder and replace it with a new one that is perfectly compatible. Reassemble the cap and you're done.

Posted on 21 November 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Dipped Beam Bulb on a Peugeot Rifter
Replacing the Dipped Beam Bulb on a Peugeot Rifter
Peugeot Rifter (2018-2026 / MK 1) To proceed with replacing the dipped beam bulb (H7), follow these steps: open the bonnet and locate the headlight containing the bulb to be replaced.…
How to Replace the Front Headlamp Bulb on a Peugeot Rifter
How to Replace the Front Headlamp Bulb on a Peugeot Rifter
Peugeot Rifter (2018-2026 / MK 1) Below are the instructions that will allow you to remove and replace the front headlamp bulb on a Peugeot Rifter. First, open the vehicle's bonnet an…
How to replace the front headlight bulbs in a Peugeot Rifter van?
How to replace the front headlight bulbs in a Peugeot Rifter van?
Peugeot Rifter (2018-2026 / MK 1) In this tutorial we can see how to replace the front headlight bulbs in the Peugeot Rifter van, an extremely simple and quick operation. First of all…

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos