Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a Peugeot Rifter

Model: Peugeot Rifter MK 1 - Years 2018-2026
Part: Headlight bulb

Below are the instructions that will allow you to remove and replace the front headlamp bulb on a Peugeot Rifter. First, open the vehicle's bonnet and start removing the plastic protective cap located behind the headlight unit; then disconnect the bulb holder along with the bulb, removing the latter as shown in the video. At this point, install the new dipped beam bulb of the correct type (in this case, H7); check its operation and refit the plastic cap on the front lamp!

Posted on 8 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb of the Peugeot Rifter.
How to replace the headlight bulb of the Peugeot Rifter.
Peugeot Rifter (2018-2026 / MK 1) The replacement of the front headlight bulbs on a Peugeot Rifter involves complex but manageable steps that can be done independently. We purchase th…
How to Replace the Number Plate Bulb on a Peugeot Rifter
How to Replace the Number Plate Bulb on a Peugeot Rifter
Peugeot Rifter (2018-2026 / MK 1) To replace the number plate bulb on a Peugeot Rifter, use a tool to lever the side of the light unit located directly above the number plate. Once th…
How to replace the front headlight bulbs in a Peugeot Rifter van?
How to replace the front headlight bulbs in a Peugeot Rifter van?
Peugeot Rifter (2018-2026 / MK 1) In this tutorial we can see how to replace the front headlight bulbs in the Peugeot Rifter van, an extremely simple and quick operation. First of all…

Where is the Spare Wheel in the Peugeot 5008?

This video shows where the spare wheel is located in the Peugeot 5008 and how to access it, useful in case of a puncture. As shown, the wheel is not in the usual boot compartment but underneath it, outside the vehicle. To free the wheel, first gather the tools provided, then open the boot, locate the small indicated hatch, and open it. Next, loosen the bolt just released using the large socket wrench enough to lower the wheel to the ground.

Watch the video!


by ScegliAuto

More videos