Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Dipped Beam Bulb on a Peugeot Rifter

Model: Peugeot Rifter MK 1 - Years 2018-2026
Part: Light bulb

To proceed with replacing the dipped beam bulb (H7), follow these steps: open the bonnet and locate the headlight containing the bulb to be replaced. On the back of the headlight unit, there is a rubber protective cover that must be removed, after which you will have access to the bulb holder. To unscrew the bulb holder, turn it counterclockwise; once the bulb holder is removed, disconnect the bulb and take the new one. Attach the new bulb to the bulb holder and screw the bulb holder back in. Finally, reattach the protective cap.

Updated on 22 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulbs in a Peugeot Rifter Van?
How to Replace the Front Headlight Bulbs in a Peugeot Rifter Van?
Peugeot Rifter (2018-2026 / MK 1) Replacing the front headlight bulbs in a Peugeot Rifter van, as shown in this tutorial, is an extremely simple and quick operation. First, ensure tha…
How to Replace the Front Headlamp Bulb on a Peugeot Rifter
How to Replace the Front Headlamp Bulb on a Peugeot Rifter
Peugeot Rifter (2018-2026 / MK 1) Below are the instructions that will allow you to remove and replace the front headlamp bulb on a Peugeot Rifter. First, open the vehicle's bonnet an…
How to replace the high beam bulb of the Peugeot Rifter
How to replace the high beam bulb of the Peugeot Rifter
Peugeot Rifter (2018-2026 / MK 1) If you own a Peugeot Rifter and want to replace one of the high beam bulbs, all you have to do is follow the steps described in the following guide. …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos