Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery of the Peugeot Rifter

Model: Peugeot Rifter MK 1 - Years 2018-2026
Part: Battery

The instructions in this guide will allow you to remove and replace the battery of the Peugeot Rifter. First, open the bonnet of the vehicle and start unscrewing the screws of the central battery mounting bracket to remove it; then disconnect both battery terminals (positive and negative), as shown in the video. At this point, remove the battery from its compartment, replacing it with a new one (of the correct type and with the same amperage); insert it in the correct orientation and connect it, then start the engine!

Posted on 3 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the 2020 Peugeot Rifter
How to replace the battery of the 2020 Peugeot Rifter
Peugeot Rifter (2018-2026 / MK 1) If you want to replace the battery of your 2020 Peugeot Rifter by yourself, but you don't know how to do it, then you just have to carefully read the…
How to Replace the Number Plate Bulb on a Peugeot Rifter
How to Replace the Number Plate Bulb on a Peugeot Rifter
Peugeot Rifter (2018-2026 / MK 1) To replace the number plate bulb on a Peugeot Rifter, use a tool to lever the side of the light unit located directly above the number plate. Once th…
What is the fuse diagram for the Peugeot Rifter?
What is the fuse diagram for the Peugeot Rifter?
Peugeot Rifter (2018-2026 / MK 1) Let's analyze in detail what is meant by the fuse box diagram, present not only in the Peugeot Rifter but in any vehicle equipped with fuses. The fus…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos