Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you deactivate the ECO mode of the Peugeot 206?

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Checks and maintenance

To deactivate the ECO mode on the Peugeot 206, there is no procedure that must be done through the central dashboard display: to deactivate this mode, it is necessary to open the hood and access the engine compartment. You will need to open the fuse box located next to the battery, near the left front headlight. Once opened, you will need to disconnect the connector at the top of the box shown in the video and leave it disconnected for a few minutes. By reconnecting it after this interval of time, you will be able to verify that the ECO mode has been deactivated.

Posted on 21 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you deactivate Eco mode in the Peugeot 206?
How do you deactivate Eco mode in the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) The Eco mode disables certain functions of the vehicle in order to save energy consumption when the car's power battery is not fully charged. This li…
How do you deactivate the Eco Mode on the Peugeot 206?
How do you deactivate the Eco Mode on the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) The Eco Mode of the Peugeot 206 cannot be deactivated by following a procedure that involves using the buttons below the central display on the dashb…
How do you deactivate the Eco Mode on the Peugeot 206?
How do you deactivate the Eco Mode on the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) To deactivate the Eco Mode of the Peugeot 206, you need to open the hood in order to have access to the components located inside the engine compartm…

Other guides you may be interested in

    Frequently Asked Questions

    • 206 1998-2012 - Where is the outside temperature sensor of the Peugeot 206 located? Read answer
    • 206 1998-2012 - How to intervene when problems arise with the indicators of the Peugeot 206? Read answer
    • 206 1998-2012 - Where is the inertia switch on the Peugeot 206? Read answer
    • 206 1998-2012 - Where is the Peugeot 206 petrol pump relay located? Read answer

How to reset the tyre pressure warning light on a Hyundai Tucson

Below are the instructions to reset the tyre pressure warning light (TPMS) on a Hyundai Tucson. First, get into the vehicle and turn on the instrument cluster; then navigate to the vehicle settings until you reach the tyre pressure monitor, identifying the tyre with incorrect pressure. At this point, restore all tyre pressures according to the specifications indicated on the label; this will reset the TPMS and the warning light will be cleared from the instrument cluster!

Watch the video!


by ScegliAuto

More videos