Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you set the clock on the Peugeot 106?

Model: Peugeot 106 MK 1 - Years 1991-2004
Part: Clock

In order to set the clock of the Peugeot 106, you need to turn on the instrument panel by inserting the ignition key into the corresponding slot: this way you can turn it to turn on the instrument panel. Now you have to hold down the button on the right side of the panel until the hours start flashing: to adjust them, just touch the button. Once the hours have been set, you can release the button, and you will notice that the minutes will start flashing: these can be adjusted in the same way.

Posted on 8 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to adjust the clock of the Peugeot 106
How to adjust the clock of the Peugeot 106
Peugeot 106 (1991-2004 / MK 1) Setting the correct time on your Peugeot 106 is really very simple and to do so, you just need to follow the steps described in this new guide addres…
How to adjust the height of the headlights on the Peugeot 106.
How to adjust the height of the headlights on the Peugeot 106.
Peugeot 106 (1991-2004 / MK 1) In this guide, we will see the instructions that will allow us to adjust the height of the front headlights of the Peugeot 106. First, let's position…
Where is the OBD2 port located in the Peugeot 106?
Where is the OBD2 port located in the Peugeot 106?
Peugeot 106 (1991-2004 / MK 1) If you own a Peugeot 106 and want to easily find the OBD2 port in the car, all you have to do is follow the steps described in the following guide. F…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos