Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the door panel of a Peugeot 308?

Model: Peugeot 308 T9, MK 2 - Years 2013-2021
Part: Door trim panel

To disassemble the door panel of a Peugeot 308, start by lowering the window and make sure the door is open for easy access. You will find several hidden screws along the panel, usually located under the armrests or behind plastic covers near the inner handle. Use a screwdriver to carefully remove these covers and unscrew all the screws. Pay special attention to the screws around the door handle, as they are essential for securing the panel. Once all the screws are removed, you can start removing the panel. Start from the bottom and use a thin plastic tool to lever without damaging the surface, gradually detaching the clips that secure the panel to the door. After removing the clips, lift the panel upwards to completely detach it. Remember that the panel is connected by various electrical cables, such as those for the lights or window controls. Carefully disconnect these wirings before removing the panel completely.

Posted on 26 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Door Panel of a Peugeot 308 SW
How to Remove the Rear Door Panel of a Peugeot 308 SW
Peugeot 308 (2013-2021 / T9, MK 2) Before starting, open the rear door of your Peugeot 308 SW. Begin by prying out and removing the insert from the door panel's pillar using a thin but…
Remove Speaker from Peugeot 308
Remove Speaker from Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Remove the speaker from a Peugeot 308? Start by removing the protection panel above the door to access the speaker. Use a trim tool to remove the ref…
How to Remove the Door Panel of a Peugeot 308
How to Remove the Door Panel of a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) .. This guide shows how to remove the door panel of a Peugeot 308 (passenger side). First, use a trim tool to pry around.. …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos