Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the door panel of a Peugeot 308?

Model: Peugeot 308 T7, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Door trim panel

See other generations:
Video tutorial

To remove the door panel of your Peugeot 308, start by taking a trim removal tool or a flat screwdriver wrapped in a cloth to avoid scratches, and unclip and remove the side covers of the panel. Next, unscrew and remove the screws that secure the door panel to the door itself.

At this point, the panel will be free to lift away from the door. Be careful of any cables and electrical connectors that may be attached to the panel.

Disconnect them carefully. Now, the door panel is completely removed, and you can proceed with any necessary maintenance or repairs.


Updated on 20 September 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Door Panel of a Peugeot 308 SW
How to Remove the Rear Door Panel of a Peugeot 308 SW
Peugeot 308 (2013-2021 / T9, MK 2) Before starting, open the rear door of your Peugeot 308 SW. Begin by prying out and removing the insert from the door panel's pillar using a thin but…
Disassembly of the rear door panel of the Peugeot 308
Disassembly of the rear door panel of the Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) In this short guide, we will see the instructions that will allow us to disassemble the rear door panel of the Peugeot 308. First, we open the rear d…
How to Remove the Front Door Panel of the Peugeot 308
How to Remove the Front Door Panel of the Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) In this mini guide for Peugeot 308 T9 owners, discover the steps to remove the front door panel. First, open the door and remove the plastic cover ne…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos