Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Door Panel of a Peugeot 308 SW

Model: Peugeot 308 T9, MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Door trim panel

See other generations:
Video tutorial

Before starting, open the rear door of your Peugeot 308 SW. Begin by prying out and removing the insert from the door panel's pillar using a thin but sturdy tool. Next, unscrew and remove the screws securing the door panel.

By doing this, you will have freed the door panel. At this point, unclip and remove it from the door, then disconnect the electrical connector and the handle cable.

Once you have removed the door panel, the disassembly is complete.


Updated on 7 May 2026 by ScegliAuto


Related tutorials

Disassembly of the rear door panel of the Peugeot 308
Disassembly of the rear door panel of the Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) In this short guide, we will see the instructions that will allow us to disassemble the rear door panel of the Peugeot 308. First, we open the rear d…
How to Remove the Rear Door Panel of a Peugeot 308
How to Remove the Rear Door Panel of a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) How to remove the right rear door panel of a Peugeot 308? Follow these steps. Before starting the disassembly, disconnect the battery terminals locat…
How to Remove the Rear Door of the Peugeot 308
How to Remove the Rear Door of the Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) This guide provides the necessary instructions to remove and replace the rear door of the Peugeot 308. First, open the rear door and start by removin…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos