Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 308
    4. : How to remove the rear door panel of a Peugeot 308

Peugeot 308 - Video tutorial

Model: Peugeot 308 T7, MK 1 - Years 2007-2014
Part: Door panel
Operation: How to remove the rear door panel of a Peugeot 308

How to remove the rear right door panel of a Peugeot 308? Let's see how to proceed. Before starting the disassembly work, let's disconnect the battery terminals in the engine compartment. With a lever, remove the plastic of the door panel handle and the plastic handle, then, with a screwdriver, we go to unscrew the fastening screws placed on the plastic panel. Once all the screws have been removed, we detach the plastic clips that block the door. Remove the door panel by hand (window lifter crank), unhook any power supply terminals and release cable. We carry out maintenance in the door by ungluing the adhesive protection.


Posted on 12 November 2023 by ScegliAuto



How to remove the rear door panel of a Peugeot 308 SW
Peugeot 308 (2013-2021 / MK 2, T9) Before starting, we will have to open the rear door of our Peugeot 308 SW. So let's start by disengaging and removing the door panel pillar insert, u
How to remove the rear door of the Peugeot 308.
Peugeot 308 (2007-2014 / T7, MK 1) In this guide, we will see the necessary instructions to disassemble and replace the rear door of the Peugeot 308. First, we open the rear door and b
How to disassemble the rear headlight of a Peugeot 308?
Peugeot 308 (2013-2021 / MK 2, T9) Good morning! Today's guide aims to dismantle the rear light of our Peugeot 308. Let's start by opening the rear door of the trunk. After that, we wi

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos