Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Battery on the 2010 Peugeot 308

Model: Peugeot 308 MK 1, T7 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Battery

See other generations:
Video tutorial

Today, learn how to replace the battery on the 2010 Peugeot 308. Open the front bonnet and remove the frame seal and the outer plastic to gain better access to the battery. To perform this operation, unscrew the outer bolts.

Once the seal is removed, pull off the red cover of the battery. Taking care not to damage the wiring, remove the fuse box. Disconnect the negative terminal of the battery and remove the battery cover by pulling it outward.

Unscrew the bolts securing the battery to the bracket and disconnect the positive terminal. Extract the battery and insert the new one. Connect the positive terminal and replace the cover so you can screw in the nuts on the bracket and reconnect the fuse box and the negative terminal.

Reinsert the outer frame and the new seal to complete the replacement.


Posted on 30 August 2026 by ScegliAuto


Related tutorials

Peugeot 308 (2007-2014 / MK 1, T7) Need to change the battery on a Peugeot 308? Remove the battery if it is damaged. Open the car door and pull up the lever to open the engine compartm…
Peugeot 308 (2007-2014 / MK 1, T7) Let's briefly see the information that will allow us to disassemble and replace the battery of the Peugeot 308 2.0 HDI. First, we open the hood of th…
Peugeot 308 (2021-2026 / P5, MK 3) To replace the battery of a Peugeot 308 key, start by locating the small hole on the side of the key. Using a flathead screwdriver or a similar tool,…

How to Replace the External Door Handle on a Renault Master

Today's instructions will show you the procedure for removing and replacing the external door handle on the front door of the Renault Master. First, open the front door and start removing the door panel by unscrewing all the fixing screws; then unscrew the handle screws, pulling it out from the outside as shown in the video. At this point, install the new external handle, as well as the original one, checking its proper operation; finally, reassemble the door panel, following the video until the end!

Watch the video!


by ScegliAuto

More videos