Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Changing the Battery on a Peugeot 308

Model: Peugeot 308 T7, MK 1 - Years 2007-2014
Part: Battery

Need to change the battery on a Peugeot 308? Remove the battery if it is damaged. Open the car door and pull up the lever to open the engine compartment located under the dashboard, then lift the front bonnet. Once the engine compartment is open, you will find the battery on the right. Remove the air filter to access the battery. Unscrew the securing bolts of the battery terminals, then remove the battery from the engine compartment. Fit the new battery and tighten the terminal bolts (same voltage). Close the bonnet after maintenance. Start the engine and test the Peugeot 308.

Updated on 21 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Gear Knob on the Peugeot 308 SW MK1
Replacing the Gear Knob on the Peugeot 308 SW MK1
Peugeot 308 (2007-2014 / T7, MK 1) In this short and simple guide, you will learn how to disassemble and replace the gear knob on the Peugeot 308, including the station wagon version, …
After changing the battery, how do you reset the Peugeot 308?
After changing the battery, how do you reset the Peugeot 308?
Peugeot 308 (2013-2021 / T9, MK 2) Indeed, replacing the battery of our car could cause sudden and unforeseen electronic malfunctions; some functions may not respond to commands, etc. …
How to replace the battery of a Peugeot 308 key?
How to replace the battery of a Peugeot 308 key?
Peugeot 308 (2021-2026 / P5, MK 3) To replace the battery of a Peugeot 308 key, start by locating the small hole on the side of the key. Using a flathead screwdriver or a similar tool,…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos