|
Do it yourself
| |||
| ||||
How to Change the Air Filter on a Peugeot 308
Model: Peugeot 308
T9, MK 2
- Years:
2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Video tutorial
To replace the engine air filter on a Peugeot 308, work with the engine off and preferably cold, with the car on level ground and the handbrake engaged. Open the bonnet and locate the air filter box in the engine compartment: it is a plastic container connected to the intake pipe. Once you find the box, clear access by removing any covers that obstruct the lid. Depending on the version, the lid may be held by clips or screws: detach or unscrew just enough to lift the lid without forcing it. Carefully lift the lid and pull out the old filter, taking care not to let dirt or leaves fall into the airbox or towards the intake. Before inserting the new filter, clean the inside of the box and especially the seating area (a cloth or compressed air can be used cautiously, without pushing debris into the duct). Insert the new filter, ensuring it is oriented correctly and sits properly on all sides without folds. Close the box by repositioning the lid, then reattach the clips or screws until securely closed (without overtightening to avoid stripping the plastic). Close the bonnet and, on the first start, check that the engine runs smoothly and that there are no vibrations or abnormal leaks from the filter box.
Posted on 30 July 2026 by ScegliAuto
Related tutorials
Peugeot 308
(2007-2014 /
T7, MK 1)
In this video tutorial, you will learn how to change the cabin air filter on the Peugeot 308. The filter is located under the bonnet: open it, and at…
Peugeot 308
(2013-2021 /
T9, MK 2)
To safely change the engine air filter on your second-generation Peugeot 308, carefully read the following guide and follow the described steps. Firs…
Peugeot 308
(2007-2014 /
T7, MK 1)
Here’s how to remove the engine air filter on a Peugeot 308. Open the car door, pull up the engine compartment release lever located at the bottom le…
Other guides you may be interested in
|
How to open the bonnet on a Volkswagen Golf?
In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.078
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |