Do it yourself
Frequently asked questions about cars and motorcycles

Disassembly of the rear door panel of the Peugeot 308

Model: Peugeot 308 T9, MK 2 - Years 2013-2021
Part: Door trim panel

In this short guide, we will see the instructions that will allow us to disassemble the rear door panel of the Peugeot 308. First, we open the rear door of the car and start unscrewing all the fixing screws that we find on the sides of the panel and on the handle; then we lever to detach the door panel, disconnecting the electrical connector of the window lift button and the opening handle cable, as shown in the video. At this point, it will be possible to access the internal components of the door, finally reassembling the door panel!

Posted on 17 July 2025 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 308 (2013-2021 / T9, MK 2) Before starting, open the rear door of your Peugeot 308 SW. Begin by prying out and removing the insert from the door panel's pillar using a thin but…
Peugeot 308 (2007-2014 / T7, MK 1) Remove the rear door panel on the left side of a Peugeot 308. Before starting the disassembly, disconnect the battery terminals located in the engine…
Peugeot 308 (2007-2014 / T7, MK 1) In today's video tutorial, see how to remove and replace the electric lock of the tailgate on the first series Peugeot 308 in simple and quick steps.…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos