Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure sensor on a Peugeot 208?

Model: Peugeot 208 UB, UJ, UP, MK 2, UW - Years 2019-2026
Part:

To reset the tire pressure light on a Peugeot 208, turn on the instrument panel without starting the engine, making sure the vehicle is stationary and that the tire pressure has been checked and corrected on all wheels. Find the reset button located under the steering column, near the lower side of the dashboard. Press and hold the reset button for a few seconds, until a message confirming the start of the calibration procedure or the completion of the reset appears on the instrument panel display. During this phase, the system will store the new tire pressure values as the standard reference. Once the operation is completed, check that the light on the dashboard has turned off, indicating that the system has been correctly reset. If there are any issues, check the tire pressure again or repeat the procedure.

Posted on 18 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure warning on the Peugeot 208
How to reset the tire pressure warning on the Peugeot 208
Peugeot 208 (2019-2026 / UB, UJ, UP, MK 2, UW) In this guide, we will discover the steps on how to reset the tire pressure warning of the Peugeot 208, as well as the 2008; before resetting the TPM…
How to reset the tire pressure warning light on the Peugeot 208
How to reset the tire pressure warning light on the Peugeot 208
Peugeot 208 (2019-2026 / UB, UJ, UP, MK 2, UW) Today we will discover the instructions that will allow us to reset the tire pressure warning light of the Peugeot 208, as well as the 2008; before p…
How to reset the tire pressure warning light in the Peugeot 208?
How to reset the tire pressure warning light in the Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) In this tutorial, we can see how to reset the tire pressure warning light in the Peugeot 208, a very simple and quick operation, to be carried out on…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos